Your online source for your farm supply, automatic waterers and more. We're small and family owned.
Secure your Ritchie automatic waterer to your concrete pad using our stainless steel anchor bolts. Two bolts are included in each package, 2 packages minimum required for each waterer.
INSTALLATION INSTRUCTIONS
Installation 3/8” Stainless Steel Wedge Anchor Bolts Ritchie Part No.: 16555
ANCHOR BOLT PACKAGE 3/8 X 5” STAINLESS STEEL (2/PKG) 14261 ANCHOR BOLT PACKAGE 3/8 X 3 1/2" STAINLESS STEEL (2/PKG)
1. Drill hole into the concrete using a carbide tipped bit. Bit size = 3/8” (same as anchor diameter) Drill the hole through the concrete or at least 1/2" deeper than the length of the anchor.
2. Clean out the hole using a wire brush, compressed air, vacuum, blow out bulb or other method.
3. Put the nut and washer onto the wedge anchor and make sure that the nut is on the last threads (this will protect the threads from damage when the wedge anchor is hammered into the hole in the concrete).
4. Insert the wedge anchor through the base hole and into the hole in the concrete pad. This should be a very tight fit- use a hammer to complete the installation until the nut and washer are tight against the base.
5. Turn the nut clockwise, until finger tight.
6. Using a wrench, turn the nut 3-4 times until snug. Do not over tighten or damage may occur to base of unit.
PeteCo Supply brings over 25-years of customer service experience and top-of-the-line products to one place. Our store is constantly growing to become your one-stop-shop while setting the standard in the customer's experience.
Reach us by calling 800-373-5834 or email us at petecosupply@gmail.com.
"Ruth at PeteCo. Was the most helpful person I’ve ever experienced in my life. She called and made sure I was getting exactly what I needed... considering my order was less than 50$ I didn’t expect to hear anything, much less get a phone call from an actual human. I’m a customer for life!!!!"