Brower 7 Gallon Poly Poultry Fount 7GF

The Brower Model 7GF, 7 Gallon Poly Poultry Fountain has a 4.5 inch opening making the waterer easy to fill and permits cleaning on the inside of the tank. The seamless poly tank will not leak or allow pathogens to hide. The trough can be removed from the tank to further assist in cleaning.

The two built-in handles permit the fount to e carried - even when full. The tank is marked in 1 gallon increments for medicating.

Instructions:

To fill, snap lower closure up over the O-ring on the discharge tube. The closure will more readily snap over the O-ring if you slightly twist the closure just as it engages the O-ring. Remove top cap, remove cup and fill tank. Replace seal, insert cup and top cap. Note the position of the seal. Do not overly tighten the cap. Just snug it enough that a vacuum is achieved. Snap lower closure downwardly to reveal hole in the discharge tube. Water will flow into the trough.

Protect the surface at the top opening as a smooth surface is needed to properly engage the seal. When replacing the cup and top cap after you fill the fount, make sure no feed or other foreign material is present on either the surface of the fount opening or on the seal. Capacity: 140 pullets or broilers, 90 hens.